Announcement: Spring Fundraising Drive In Progress

Please visit our home page to see this and other announcements: https://www.mmdigest.com     Thank you. — Jody

MMD > Archives > April 2010 > 2010.04.15 > 06Prev  Next


Assembling a Castlewood Busker Organ Kit
By Mike Schoeppner

I assembled a Castlewood kit about three years ago and it has been
playing ever since.  I found the design and quality of the kit
excellent.  It even comes with a small tubing cutter and an electronic
tuner.  As long as you can follow directions, and check as you go
along, you can do it.

There was only one minor problem -- one size of tubing supplied was
at the upper end of the diameter tolerance, and I wanted a tighter fit
on the nipples.  Castlewood would have sent me a piece of replacement
tubing, but I found same size-slightly tighter fit-at the local
independent hardware store for a couple dollars.

Mike Schoeppner



(Message sent Thu, 15 Apr 2010 14:29:45 -0700 (PDT) , from time zone -0700.)

Key Words in Subject:  Assembling, Busker, Castlewood, Kit, Organ

Related by Subject:
2017.09.28.01 - Recovering Ampico Sleeve Pneumatic Assemblies
from Bill Koenigsberg
2014.01.03.02 - Seek Various Musical Box Starwheel Assemblies
from Jack Perron
2010.11.22.02 - Seek Disc Musical Box Star Wheel Assemblies
from Jack Perron
2010.04.15.06 (This article) - Assembling a Castlewood Busker Organ Kit
from Mike Schoeppner
2010.04.14.04 - Assembling a Castlewood Busker Organ Kit
from Jim Westcott

Please Support Publication of the MMD with your Generous Donation
No PayPal account required

 

SSL Certificate
by
Let's Encrypt