Mechanical Music Digest  Archives
You Are Not Logged In Login/Get New Account
Please Log In. Accounts are free!
Logged In users are granted additional features including a more current version of the Archives and a simplified process for submitting articles.
Home Archives Calendar Gallery Store Links Info

End-of-Year Fundraising Drive In Progress. Please visit our home page to see this and other announcements: https://www.mmdigest.com     Thank you. --Jody

MMD > Archives > December 2005 > 2005.12.05 > 10Prev  Next


Aeolian Plastic Unit Valves
By D. L. Bullock

I have been restoring a number of these Aeolian players recently.
I have both restored the original blocks and purchased new ones from
Denis Wilkinson.  The new ones are the way to go.  The problem from
the factory in these Aeolian players has always been the valve itself.

1) The factory valve is of sponge neoprene of the kind that deteriorates
at its surface within months.  It is the problem with the olden days of
the 70's when Durrell Armstrong tried to get us all to use sponge
neoprene for all valves.  The stuff seals 100% when you first install
it, but after a few months or a year or two they seep like a sieve.
Also, they compress so you can never really regulate the valve travel
because travel changes with the pressure in the stack.  Also many of
these instruments have valves that come loose from the valve stem, and
then they are just a flat-out 3/8-inch-diameter leak to the system.
You get a couple of these leaks going and the piano can go years
without playing at all.

2)  The original regulation of valve travel ran from 60/1000ths to
90/1000ths and that allows for a huge amount of pressure lost each time
any valve is in motion.  This is why you could adjust volume at the
pump and get no playing on the piano softer than mezzo forte.  Anything
lower in pressure dropped out notes.

The new valves by Denis Wilkinson are a close grained solid silicone
that does not compress easily.  The valve travel is correct for soft
playing (around 30-35/1000ths).

When I restore these players they play better than they did when new,
they take so much less work to play (especially with my new bellows
cloth installed as well).  They are able to play softly and pedal like
a dream.
 
I glue them on with plastic glue, PVC-E or Tacky glue.  First, however,
you must sand the open side of the block to rough it up enough for some
tooth for the glue, and also sanding flattens out that side as they are
not always 100% lined up when glued together.

I am able to restore these stacks very economically.  Some of them need
pneumatics recovered, some do not.  Send yours in and we will give you
a deal on it.

D.L. Bullock   St. Louis
http://www.pianoworld.us/


(Message sent Mon 5 Dec 2005, 16:33:04 GMT, from time zone GMT-0600.)

Key Words in Subject:  Aeolian, Plastic, Unit, Valves

Home    Archives    Calendar    Gallery    Store    Links    Info   


Enter text below to search the MMD Website with Google



CONTACT FORM: Click HERE to write to the editor, or to post a message about Mechanical Musical Instruments to the MMD

Unless otherwise noted, all opinions are those of the individual authors and may not represent those of the editors. Compilation copyright 1995-2024 by Jody Kravitz.

Please read our Republication Policy before copying information from or creating links to this web site.

Click HERE to contact the webmaster regarding problems with the website.

Please support publication of the MMD by donating online

Please Support Publication of the MMD with your Generous Donation

Pay via PayPal

No PayPal account required

                                     
Translate This Page