Mechanical Music Digest  Archives
You Are Not Logged In Login/Get New Account
Please Log In. Accounts are free!
Logged In users are granted additional features including a more current version of the Archives and a simplified process for submitting articles.
Home Archives Calendar Gallery Store Links Info
MMD > Archives > April 1999 > 1999.04.04 > 01Prev  Next


Pressure Range of Organ Pipes
By Mike Knudsen

Robbie mentions that Vicki Webb showed a pipe that responds well over
a wide pressure range.  This reminds me of some "well known facts" that
I had learned a million times in becoming a pipe organ lover, and which
I quickly UN-learned after I got hold of a 20-note Deleika crank organ
and later a 31-note Raffin.

Well-known "facts":

  "(1) Organ pipes (as opposed to free reeds as in accordions) are
   voiced for exactly one pressure, and will blow sharp or flat or
   overblow the harmonic or just hiss at you, if you raise or lower
   that pressure by more than a few percent."

But my Raffin has an internal handle you can use to press down on the
reservoir bellows top to raise the pressure, or pull up to lower it.
I can "goose"* a good accent or quick crescendo with this, and the
pipes barely go out of tune while playing noticeably louder.  And when
I put too many stops on at once, the pipes rob each others' wind and
play softer, but do not go flat (whew!).

  "(2) Organ pipes voiced on high pressure (such as used in monkey and
   street organs) must sound dull, thick, and tubby, while also strained
   and forced."

In reality, the Bourdons on both my organs sound more clear and alive
than any of their dull relatives living in church or concert organs on
lower pressures.  Their sound is not forced, but more as if they're
cheerful to be playing.

  "(3) High pressure pipe work must be 'nicked' to the point of no
   'chiff' or articulation."

Fact: Both my organs' pipes (except for the Violins in the Raffin)
chiff like a neo-Baroque tracker organ, or like a calliope.  Come to
think of it, nothing uses higher pressure than a calliope, and they
chiff like a xylophone.  To be fair, our organs tend to use the slider
windchest as advocated by Baroque enthusiasts.

  "(4) High pressure pipes must have arched upper lips, to avoid
   overblowing.  This makes for the expected dull tone."

All the pipes in both my organs have straight upper lips -- which may
explain their lively, unforced tones.

Anyway, so much for some eternal truths of organ building.  Could it be
that makers of street, monkey, and fair organs learned a lot more about
pipe voicing in the past 100 years than their churchly counterparts?
After all, look who invented the harmonic frein.

And a warning to those of us looking to scrounge old church organ pipes
for building our own street organs:

  Watch out, those old church organ pipes may not be good enough !

Mike Knudsen

 [ * Mike Schwimmer says the Yiddish word is "ootz" or "utz".
 [ "Give it a gentle utz" every now and then!  ;)  -- Robbie


(Message sent Sun 4 Apr 1999, 17:46:38 GMT, from time zone GMT-0400.)

Key Words in Subject:  Organ, Pipes, Pressure, Range

Home    Archives    Calendar    Gallery    Store    Links    Info   


Enter text below to search the MMD Website with Google



CONTACT FORM: Click HERE to write to the editor, or to post a message about Mechanical Musical Instruments to the MMD

Unless otherwise noted, all opinions are those of the individual authors and may not represent those of the editors. Compilation copyright 1995-2024 by Jody Kravitz.

Please read our Republication Policy before copying information from or creating links to this web site.

Click HERE to contact the webmaster regarding problems with the website.

Please support publication of the MMD by donating online

Please Support Publication of the MMD with your Generous Donation

Pay via PayPal

No PayPal account required

                                     
Translate This Page