Re: Simplex Valve Question
By Brett Mohr
Frist I would like to thank all for the tips on hot glue removal and to tell the tip that Doug Adam sent to me direct. He say's " Try brushing some carpenters glue on the parts where the old hot glue is. Just when its about dry you can peel it and the old hot glue right off the piece" I'm going to try them all out to see what works best for me. Ed I also bought a set of ready made valves for the three tier Simplex and after about 4 years they still perform well. I did find that I had to scrape excess glue off the patent leather and trim some of the sponge neoprene that was not glued on straight. Also some of the stems had to be reglued for they were to loose. I did not find that fitting a little loosely in the valve hole hurt the valves performance.
Brett
|
(Message sent Tue 15 Oct 1996, 03:22:54 GMT, from time zone GMT-0500.) |
|
|
Mechanical
Music Digest™ Archives
